C 3, TM 11-6625-1683-15
Figure 7-8. Special Purpose Cable Assembly CX-10429/PPS5, schematic diagram.
Figure 79. Special Purpose Cable Assembly CX10429/PPS-5, schematic diugram.
attached cable clear of the shell, slip
(6) Withdraw the cable from the shell.
the plastic end sleeves that cover each
b. If the connector is to be replaced, proceed
terminal back along its wire. This will
fully expose the terminals.
(1) Separate the sections of the replace-
(5) Carefully unsolder each lead from its
ment connector as indicated in a(1)
and (2) above.