b. Locate amplifier-frequency multiplier 456-
b. Release the sliding lock on J8 and
415 on the front of the receiver test facility chassis.
disconnect J8 from P1.
c. Loosen the two captive screws and pull the
c. Remove the four screws that secure the
assembly directly away from the chassis.
power supply to the chassis and remove the power
d. Position the replacement power supply and
amplifier- frequency multiplier, engage the chassis
connector, and tighten the two captive screws.
insert and tighten the four screws.
e. Connect J8 and P1 and secure with the
a. Remove the receiver test facility front
Figure 5-15. Receiver Test Facility Chassis, Front View.