wires, and is used for connecting the IFF set to the ac
Cables 1A1A2W1, W2, and W3 (CX-
12916/TPM-24(V)) are 2-foot cables used for connection
c. Cable 1A1W3 (SM-D-986522) is an 8-foot cable
between rf switch module connectors 1A32P1 and
used for connecting the IFF set to the radar test set.
1A32XP1, between self-test of switch module connectors
d. Cables 1A1W4 and W5 (CG-3750/TPM-24(V))
are six 6-foot cables used for connection of the sum and
connectors 1A34P1 and 1A34XP1, between receiver
difference connectors of the IFF set to the hybrid
module connectors 1A35P1 and 1A35XP1, and between
attenuator 'or to the radar test set.
low voltage power supply modules 1A46P1 and
e. Cables 1A1W6, W7, and W8, (CG-3754/TPM-
1A46XP1, when these modules are extended.
24(V)) are 3-foot cables used when modules are
i. Cable 1AlA2W4 is a 10-inch cable used to
extended from the processor chassis to connect the
connect transmitter module driver assembly cable
connectors of the extended chassis to the semirigid
A34A1A8P1 to transmitter module connector A34J2
coaxial cables in the processor chassis.
f Cable 1A1W9 is a 33. inch critical length cable
used to connect rf switch module connector A32A3J3 to
j. Cable 1A1A2W5 is a 10-inch cable used to
receiver module connector A35A1J2 when the receiver
module is extended from the processor chassis.
connector A34A1A7P1 to transmitter module connector
g. Cable 1A1W10 is a 34.58 inch critical length
A34J1 when transmitter assembly A34A1 is extended
cable used to connect rf switch module connector
from the transmitter module.
A32A3J2 to receiver module connector A35A1J3 when
k. Grounding straps 1A1A2W6 and W7 provide
the receiver module is extended from the processor
ground connections for self-test rf switch card A33A1
when it is extended from the module.