TM 11-5410-216-24P
(b) The maintenance code entered in
NOTE
the fourth position indicates whether the item is to be
When a stock numbered item is
repaired and identifies the lowest maintenance level with
requisitioned, the repair part received
the capability to perform complete repair (i.e., all
may have a different part number
authorized maintenance functions). This position will
than the part being replaced.
contain one of the following maintenance codes:
Code
Application/Explanation
f.
Description. Indicates the Federal item
O-
The lowest maintenance level capable of
name and, if required, a minimum description to identify
complete repair of the support item is the
the item.
organizational level.
g. Unit of Measure (U/M).
Indicates the
F-
The lowest maintenance level capable of
standard of the basic quantity of the listed item as used
complete repair of the support item is the
in performing the actual maintenance function. This
direct support level.
measure is expressed by a two-character alphabetical
H-
The lowest maintenance level capable of
abbreviation (e.g., ea, in, pr, etc). When the unit of
complete repair of the support item is the
measure differs from the unit of issue, the lowest unit of
general support level.
issue that will satisfy the required units of measure will
D-
The lowest maintenance level capable of
be requisitioned.
complete repair of the support item is the
h. Quantity Incorporated in Unit. Indicates the
depot level.
quantity of the item used in the breakout shown on the
Z-
Nonreparable. No repair is authorized.
illustration figure, which is prepared for a functional
group, subfunctional group, or an assembly.
(3) Recoverability code.
Recoverability
4.
Special Information
codes are assigned to support items to indicate the
a. The following publications pertain to the
disposition action on unserviceable items.
The
OQ-290(V)1/MSM and its componets:
recoverability code is entered in the fifth position of the
TM 3-6625-2250-12, M10 Alarm.
Uniform SMR Code format as follows:
TM 5-4120-308-25P, Air Conditioner, Compact
Recoverability
Vertical, 208V, 3 Phase, 50/60 Hz; 18,000
Codes
Definition
BTU Cooling, 12,000 BTU Heating (Keco
Z-
Nonreparable item.
When unserviceable,
Industries Inc, Model F18T-2).
condemn and dispose at the level indicated
TM 5-4120-360-24P, Air Conditioner, Vertical,
in position 3.
Compact Type 1, Vertical Size C, 18,000
O-
Reparable item.
When uneconomically
BTU/HR, 208V, 3 Phase, 50/60 Hz (Keco
reparable, condemn and dispose at
Model F18T-2).
organizational level.
TM 9-2330-363-24P, Van, Modification XM-995.
F-
Reparable item.
When uneconomically
TM 11-5410-216-14, Test Facility, Electronic
reparable, condemn and dispose at the
Equipment OQ-290(V)1/MSM.
direct support level.
TM 11-5805-201-20P, Telephone Set TA-3121
D-
Reparable item. When beyond lower level repair
PT.
capability, return to depot. Condemnation
TM 11-5805-201-34P, Telephone Set TA-3121
and disposal not authorized below depot
PT.
level.
TM
11-5830-221-24P,
Telecommunication
Station LS-147C/FI.
c. National Stock Number.
Indicates the
TM 11-6130-415-24P, Power Protect Kit MX-
National stock number assigned to the item and will be
20461MSM (To be published).
used for requisitioning purposes.
d. Federal Supply Code for Manufacturer
(FSCM). The FSCM is a 5-digit numeric code listed in
1112(V1)/U.
SB708-41/42 which is used to identify the manufacturer,
distributor, or Government agency, etc.
451.
e. Part Number. Indicates the primary number
TM 11-6625-3006-24P, Power Head Model
used by the manufacturer (individual, company, firm,
M4240A, N421D, and N4226 (General
corporation, or Government activity) which controls the
design and characteristics of the item by means of its
TM 11-6625-3007-24P, Power Meter Model 475
engineering drawings, specifications, standards, and
inspection requirements to identify an item or range of
published).
items.
b. National stock numbers that are missing
from P
2