TM 11-6625-1696-12
Figure 5-11. Transmitter Test Facility Panel Rear View.
5-12.
Replacement
of
Electrical
Frequency
e. Connect P1 to J11 and tighten the two
Synthesizer 245-800202-000 (fig. 5-12)
bracket screws.
5-13. Replacement
of
Amplifier-Frequency
Multiplier 407-070 (fig. 5-12)
chassis, locate electrical frequency synthesizer 245-
800202-000 and electrical connector bracket P1.
b. Loosen the two screws that secure the
chassis, locate amplifier-frequency multiplier 407-070.
b. Loosen the two captive screws and pull the
bracket to the chassis. Disconnect P1 from Jll by sliding
the bracket away from the synthesizer.
amplifier-frequency multiplier directly away from the
c. Loosen the four captive screws and pull the
chassis.
c. Carefully
synthesizer directly away from the chassis.
position
the
replacement
d. Carefully
position
the
replacement
amplifier- frequency multiplier, engage the chassis
synthesizer, engage the chassis connector, and tighten
connector, and tighten the two captive screws.
the four captive screws.
5-14
Previous Page
