TM 11-6625-2398-15-2
CHAPTER 2
INSTALLATION
(2) Remove polyethylene wrapped component
2-1. Unpacking
cable kits, and carton from the wooden packing cases.
a. Packaging Data.
Components of the Test
(3) Open the polyethylene wrap and remove
Facilities Set AN/TPM-24 (V)2 are placed in polyethylene
the transit cases and the inertial antenna load.
wrap and packaged in sealed wooden crates.. Figure 2-
(4) Open transit cases and inspect humidity
indicator (should be blue). If the humidity indicator is
set. Group 1 components are packaged in canvas bags
pink, inspect components for moisture damage.
and wooden s. Group 2 components are packaged in a
single wooden crate.
b. Removing Contents.
(1) Cut the straps and remove the top cover
from each packing case.
2-1
Previous Page
