TM 11-6625-2398-15-2
material).
A minimum reading of 100 megohm is
9-4. General Test Requirements
required.
Always allow at least 30 minutes for the equipment under
test, and the test equipment, to reach stabilized
9-7. Interface Adapter unit 1A1A1, Standards
temperature.
The tests outlined in paragraph 8-6 should be performed
after the interface adapter unit has been repaired.
9-5. Continuity Checks
Check the continuity of all cables, jacks, extender
9-8. Hybrid Attenuator 2A1, Standards
boards, and test points.
The tests contained in the calibration procedure technical
bulletin should be performed after a component of the
9-6. Insulation Resistance
hybrid attenuator has been repaired (refer to TB-11-
Measure the insulation resistance of all cables (the
6625-2398-35).
resistance between the conductor and insulation
9-2
Previous Page
