TM 11-6625-2398-15-3
Figure 1-4. Adapter. Test MX-8565/ TPM-24(V).
1A3A3A2A4, and 1A3A3A2A5 in the receiver-transmitter.
e. Adapters CP9/CP10/CP11 are BNC-type
T-
connectors used during maintenance of the iff set.
i. Printed-circuit board extractors MP1 and MP2
provide an efficient means of removing printed-circuit
f. Attenuators AT1/AT2 are fixed 6-dB, 50ohm,
boards from the iff set assemblies.
coaxial N-type attenuators used for testing and/or
calibration of components of the test facilities set.
j. Terminations AT3/AT4 are 50-ohm, 2 watt,
coaxial BNC-type, dummy loads used as low power rf
g. Extender boards A3/A4 are used to make
termination during maintenance of the iff set and for
accessible for maintenance all printed-circuit boards in
testing and/or calibration of the hybrid attenuator.
the synchronizer and processor.
and printed-circuit
boards 1A3A1A1 and 1A3A2A1 in the receiver-
k. Terminations AT5/AT6 are 75-ohm, 1/2 watt,
coaxial BNC-type, dummy loads used as video
terminations during maintenance of the iff set.
h. Extender board A5 is used to make accessible for
maintenance
printed-circuit
boards
1A3A3A2A3,
1-7
Previous Page
