TM 11-6625-2398-15-2
3-6. Connection of Cable 1A2W12
3-8. Operation of Interface Adapter Unit 1A1A1
The interface adapter unit simulates the interface
Cable 1A2W12 is provided to connect Test Set-
between the IFF set and the associated radar
Simulator Transponder AN/APM-245, and other external
test equipment to connector XA4P1 of the IFF set.
information to the IFF set. Video signals from the IFF set
Refer to IFF set system manual, TM 11-5895-532-34-1,
are routed to individually labeled test jacks on the
for detailed connection procedures.
interface adapter unit for monitoring purposes. Various
functions of the IFF set can be enabled by means of front
3-7. Connection and Use of Cable 2W1
panel toggle * switches. The mechanical and electrical
Cable 2W1 is provided to connect input power and
loads, in conjunction with azimuth controls are uses for
external test equipment to the receiver-transmitter of the
IFF set. Typical connections of cable 2W1 are given in
TM 11-5895-532-34-2.
Change 1 3-4.1
Previous Page
