TM 11-6625-2414-15
types of connectors are repaired: Amphenol,
wire. P22 connects to shield at P21 with No.
Bendix, and Cannon. Amphenol connectors are
22 awg wire.
repaired/replaced using crimping tool SM-A
625812, adapters SM-B-625813-1 (pins), SM-
B-625813-2 (sockets), insertion tool SM-A-
Terminations
625815-2 and extractor tool SM-A-625815-3 (or
a. General. Repair of breakout boxes and ter-
insertion/extractor tool SM-B-625892). Bendix
minations consist of replacing any defective com-
connectors are repaired using crimping tool
ponents or wiring. The components are jacks,
MS3191-1,
contact
positioner
MS3191-20A,
connectors, and resistors. Procedures for repair-
e x t r a c t o r tool SM-A-625817-2 and insertion
ing wiring and replacing components sire given
below.
tool SM-A-625817-4.
b. Repair of Internal Wiring. Breakout boxes
NOTE
are wired with 24 awg wire except for breakout
box SM-B-625716 current. monitoring circuitry
Extractor teal SM-A-625817-2 has a reversible
which is 20 awg. Power supply terminations have
head.
24 awg wire. Microphone and headset termina-
Cannon connectors are repaired using crimping
tions use 26 awg wire. Standard tools are used to
tool MS31911, positioner P20-3191-37 (con-
replace defective wiring of all boxes.
tact size No. 20) and extractor/insertion tool
c. Repair/Replacement of Jacks. Jacks are re-
CIET20HDB.
placed by unsoldering any wiring, removing jack,
replacing it with a new one, and then resoldering
minations are given in the schematics, figures
connection.
3-1 through 3-5. Defective resistors are replaced
by standard procedures.
d. Repair/Replacement of Connectors. Three
3-4
Change 1
Previous Page
