OPERATING INSTRUCTIONS
Section I. SERVICE UPON RECEIPT OF EQUIPMENT
current applicable MWO's have been applied.
(Current MWO's applicable to the equipment are
a. Inspect the equipment for damage incurred
listed in DA Pam 310-7.)
during shipment. I f the equipment has been
damaged, report the damage on DD Form 6.
b. Check the equipment against the component
When the test set is in proper working condition, no
listing and the packing slip to see if the shipment is
control settings or combination of settings will
complete. Report all discrepancies in accordance
result in equipment damage or create a hazard to
with the instructions of TM 38-750. The equip-
personnel.
ment may be placed in service if a minor assembly
or part that does not affect proper functioning is
missing.
2644 / ASN; figure 2-2 illustrates the control
c. Check to see whether the equipment has been
panel for TS-2645 / ASN. Table 2-1 provides
modified. (Equipment that has been modified will
functional information for the operator's controls
have the M W O number on the front panel, near the
on the test set control panel.
nomenclature plate.) Also, check to see whether all
TM6625-2634-14-2
Previous Page
