TM 11-6625-928-12
C1
CHAPTER 2
I N S T A L L A T I O N AND OPERATING INSTRUCTIONS
Section I. SERVICE UPON RECEIPT OF EQUIPMENT
as listed on the packing slip- If a packing slip
2 - 1 . Unpacking
i s not included, check the maintenance kit
a- Packaging Data. When packed for ship-
list (para 1-6)
a g a i n s t the equipment
ment, the maintenance kit is placed in a cor-
Report all discrepancies in accordance with
r u g a t e d shipping carton- A typical shipping
TM 38-750- Shortage of a minor assembly or
c a r t o n and its contents are shown in figure
p a r t that does not affect proper functioning
2 1 . The shipping carton is approximately
should not prevent use of the maintenance kit-
21 inches high by 22 inches deep by 25
c- If the maintenance kit has been used or
inches wide, weighs approximately 5 pounds,
reconditioned, see whether it has been changed
and provides a total capacity of 6-9 cubic feet-
by a modification work order (MWO). If the
b- Removing Contents-
maintenance kit has been modified, the MWO
(1) Cut the paper tape along the top of
n u m b e r will appear
the corrugated shipping carton (fig- 21 ) and
t h e nomenclature plate. If modified, see that
old back the flaps-
a n y operational instruction changes resulting
( 2 ) Remove the envelope that contains
f r o m the modification have been entered in
the technical manuals-
t h e appropriate paragraphs-
( 3 ) Remove the corner cushioning pads
ZVoi!e- Current MWO's applicable to the maintenance
from each of the top four corners of the inner
kit are listed in DA Pam 310-7.
carton-
( 4 ) Carefully lift out the corrugated in-
2-3- Damage From Improper Settings
ner carton-
To avoid damage to the maintenance kit or
(5) Cut the paper tape along the top of
under test, be sure that all
the corrugated inner carton and fold back the
power switches and circuit breakers are at
flaps-
OFF before making or changing any test set-
--
(-6- Remove the equipment-
)
--
up cable connections-
2-2- Checking Unpacked Equipment
organizational maintenance repairmen; items used by
a - Inspect the maintenance kit for damage
higher maintenance personnel are covered in instruc-
incurred during shipment- If the maintenance
tions for the appropriate maintenance category- Refer
kit has been damaged, report the damage on
to the applicable technical manual (app- A) for the
description of the controls on Communication System
DD Form 6 (para l-3 b).
Control C-6533/ARC-
b- See that the maintenance kit is complete
2-1
Previous Page
