Block 2700 Voltage and Continuity Test

TM 11-6625-1683-15

d. Set the 2400 block power ON-OFF switch

to OFF,

8.1-19. Block 2700 Voltage and

Continuity Test

a. Connect the equipment as required (para

b. Set the 2700 block power ON-OFF switch

to ON. Check the 2700 connector J24 and

8.1-21. Block 2900 Voltage and

the test jacks (VIDEO TP53 and TP54, and

Continuity Tests

TRIG TP52) as indicated in c below; use the

CX-10437/PPS-5 cable.

a. Connect the equipment as required (para

c. Make voltage and/or continuity measure-

ments as indicated in the chart below,

b. Set the 2900 block power ON-OFF switch

to ON. Check 2900 connector J25 and test jack

TP55 as indicated in c below; use the CX-

10438/PPS-5 cable.

c. Make voltage and or continuity measure-

ments as indicated in the chart below.

d. Set the 2700 block power ON-OFF switch

to OFF.

8.1-20. Block 2800 Voltage and

Continuity Tests

a. Connect the equipment as required (para

d. Set the 2900 power ON-OFF switch to

OFF.

b. Check 2800 block J12 as indicated in c

below; use the CX-10431/PPS5 cable.

8.1-22. CRT TEST Voltage Test

c. Make voltage and/or continuity measure-

ments as indicated in the chart below.

a. Connect the equipment as required (para

b. Check CRT TEST connectors J16 (c be-

low) and J17 (d below) ; use the CX-10443/

PPS-5 cable.

8.1-8 CHANGE II

Index